Sheet S-04 · WISECUT tube machines
WT-3015PT Tube and Plate Laser Cutter in One Machine
The WT-3015PT is one fiber laser cutting machine that cuts sheet up to 3050 × 1550 mm and tube from Φ20 to 220 mm, up to 6000 mm long.
- Machine
- WT-3015PT
- Type
- Sheet and tube combination
- Chucks
- Not stated
- Max tube length
- 6000 mm
- Power
- 3–12 kW
- Sheet
- S-04
APlate and tube length
Tube length drawn to scale. Chuck positions are schematic.
BOverview
The WT-3015PT is a tube and plate laser cutter in one machine: it cuts sheet up to 3050 × 1550 mm and tube from Φ20 to 220 mm, up to 6000 mm long, and it is offered from 3 to 12 kW.
Our website says changing between sheet and tube needs no extra clamping. That's a stated claim for the machine, so check it against your own parts in a sample cut. An exchange table for the sheet side is optional. The idea behind a combined machine is simple: one machine, one floor space, two kinds of work. Whether it pays depends on how much of your work is tube, and on how often you'd switch between the two.
Say tube is a fifth of your orders and the rest is sheet. A combined machine can make sense. Say tube is half your volume and you run long lengths. Then a dedicated tube machine will probably fit better, and the WT-6023T or WT-6035T is the place to start.
CDatasheet
Stated rows come from our product information. Open rows are confirmed in the quotation.
| Parameter | Value | Status |
|---|---|---|
| Power range | 3,000–12,000 W | Stated Offered from 3 to 12 kW. |
| Sheet format | 3050 × 1550 mm | Stated Flat sheet and plate. |
| Tube size | Φ20–220 mm | Stated Round tube diameter. |
| Maximum tube length | 6000 mm | Stated Nominal value from our website. |
| Exchange table | Optional | Stated A second platform for sheet. |
| Tube section and clamping range | — | In the quote Confirmed per machine, against your section drawing. |
| Wall thickness and cutting speed | — | In the quote Not printed here. They depend on material, power and configuration. |
C2Website parameter table
Template values from our website; they will be replaced by the official model table.
| Parameter | Value |
|---|---|
| Model in website table | WT3015PT |
| Working size | 1550 × 3050 mm |
| X / Y / Z travel | 1550 / 3050 / 300 mm |
| X/Y position accuracy | ±0.05 mm |
| Z position accuracy | ±0.008 mm |
| X/Y repositioning accuracy | ±0.03 mm |
| Maximum no-load running speed | 120 m/min |
| Processing panel thickness (website table) | 18 mm max |
| X/Y maximum acceleration | 1 G |
| Table maximum load | 1 T |
| Cooling | Water cooling |
| Power demand | 380 V, 100 A, 50 Hz |
| Overall dimensions | 5300 × 2600 × 2100 mm |
| Machine weight | 7.5 T |
| Laser in table configuration | Raycus 6000 W |
Parameters from the WISECUT website parameter table (template values; to be replaced by the official model table). Final specification is confirmed in the quotation.
DFeatures
- Cuts flat sheet and tube on one machine.
- Sheet format 3050 × 1550 mm; tube Φ20–220 mm, up to 6000 mm long.
- Our website states that switching between sheet and tube needs no extra clamping.
- Optional exchange table for sheet; offered from 3 kW to 12 kW.
EWhere it is used
- Mixed work: mostly sheet with regular tube, or the reverse, where two separate machines would sit half idle.
- Workshops short of floor space for a sheet machine and a tube machine side by side.
- Buyers who want to start both kinds of work on one machine before they decide whether tube justifies its own machine.
- A fair view from outside. An independent buyer's guide says a combined machine removes transfers between separate machines, but only earns its place if tube work is genuinely recurring; dedicated tube lasers suit shops where tube is a core line with sustained volume. Read it at Durma's buyer's guide.
FOpen until the quote
Send the tube you cut and we confirm these items for this machine in the quotation:
- Tube section and clamping range. Website template values are listed in the parameter table; the quotation confirms the range against your section drawing.
- Wall thickness and cutting speed. Depend on material, power and configuration; confirmed in the quotation.
- Laser source, controller and cutting head. Fixed in the quotation for the configuration you order.
- Machine footprint and weight. Website template values are listed in the parameter table; the installation drawing comes with the quotation.
GFAQ
What tube sizes does the WT-3015PT cut?
Round tube from Φ20 to 220 mm, up to 6000 mm long, as stated on our website. Other sections and the clamping range are confirmed in the quotation against your drawing.
Is it better than separate sheet and tube machines?
It depends on the mix. A combined machine saves floor space and a second machine. A dedicated tube machine usually suits long or heavy tube better. The datasheet index lets you compare the options side by side.
Do I need to re-clamp when I switch from sheet to tube?
Our website states that switching needs no extra clamping. Test it on your parts: send a drawing and we'll cut a sample.
Does it have bevel cutting?
This page doesn't state bevel cutting for the WT-3015PT. The bevel page covers the machine that does.
Where can I see a sample service?
The sample service page says what to send for free proofing.
HNeighbouring sheets
Send a tube for the WT-3015PT
Tube type, section, wall thickness, length and material are enough to start. We reply with a suitable machine and a quotation.